• lightweight frame components
• reduction of packaging volume

The diagram below compares 2 tent profiles with the same load capacity. This shows the difference in size and weight between the traditional profile (A) and the new Carbon-Hybrid profile (B).

Standard insulated temporary warehouses range in width from 5.00 m – 30.00 m, with lengths that are unlimited in 5.00 m increments and wall heights from 4.20 m to 6.20 m. A wind load of 0.5 kN/m² (=102 km/h) and a snow load of 1.5 kN/m² (=100 kg) are achievable. Custom sizes and designs, as well as higher wind and snow loads are available upon request.

Standard warehouses have a typical installation time of just 7–8 days and are compliant with local building codes.

HTS TENTIQ provides a range of rental and purchase options.

• Canopy buildings usually take around 3 or 4 days to install and can be used on a temporary or permanent basis. Both hire or sale contracts offer flexible options around dismantling, removal, relocation or resale.
• Engineered from a lightweight aluminium frame and an industrial grade PVC roofing system, industrial canopies can be supplied in a number of different configurations and options. A simple roof canopy can be supplied or any number of walls can be added (as long as a consistent air-flow is maintained). Wall panels can either be corrugated steel sheeting or PVC side panels.
• To assist with loading/ unloading applications, an industrial canopy can be linked to existing warehouse buildings or together. 7.20 m wall height is available to allow for double-deck trailers.

• The HTS TENTIQ design and production centre in Kefenrod, Germany, has the capability and capacity to design, engineer and manufacture just about any size, configuration and specification of prefab buildings.
• Bespoke designs are so common for us that they are part of our standard product offering. The main difference between an ‘off-the-shelf’ building and a ‘made-to-measure’ building is the slightly longer lead time for the latter.
• One of the main advantages of customised buildings is the ability to manufacture to site-specific structural safety standards – achieving higher than the standard country or regional snow and wind tolerances. We have even engineered and manufactured prefab buildings for high altitude earthquake zones in the Chilean Andes!

Bespoke Temporary & Prefab Buildings using Cutting-Edge Technology
Know-how and technology, combined with our vast, world leading in-house manufacturing resource, are key factors to our success in this specialist field. Our designers and engineers are able to draw upon a wealth of experience in the design and manufacture of prefabricated buildings. This, together with the utilisation of the very latest in CAD modelling technology and CNC (Computer Numerically Controlled) precision engineering equipment, enables us to convert your ideas into finished product quickly and economically.

Practical Design that Doesn’t Compromise on Quality

When designing custom temporary and prefabricated buildings, we aim to utilise the maximum amount of components from our tested off-the-shelf range of standard prefab buildings. This means we can proceed to the manufacturing stage much earlier than if we were to manufacture new components. By utilising as many stock parts in the design as possible, overall project costs are kept to a minimum.  These benefits won’t ever compromise the quality of your custom-built prefabricated buildings and special projects.

The tent was designed so that it can be set up anywhere in the world under the toughest climatic conditions. It can be set up by 8 people in less than 30 minutes without the need for additional mechanical or electrical tools. All necessary assembly tools are included.

The Carbon-Hybrid maintenance tent is strong, reliable, easy to set up and provides a protected, adaptable working environment. High wind and snow loads were taken into account when developing the versatile structure, making it particularly suitable for use as a maintenance or workshop tent.

It has been designed to accommodate a range of military vehicles and equipment, large or small, with a clearance height of at least 4.00 m.

This Large Marquee is also available with an A-frame roof, curved roof, shaped roof and high peak roof.

Modular shapes and sizes from 10.00 m to 60.00 m clear-span widths with varying eave heights ranging from 2.40 m to 6.00 m and unlimited in length. Standard options and customised structures available.

This Large Marquee is also available with an A-frame roof, curved roof, shaped roof and high peak roof.

Large tents are equipped with an extruded aluminium frame that can withstand high snow and wind loads without any problem. The tent systems are built according to recognised standard specifications and can be adapted to country-specific requirements. They are available in different sizes and unlimited lengths.

These large tents can be packed and transported in 20-foot containers and, depending on their size and configuration. They can be set up in just a few hours.

This makes it the most stable, yet lightest structure of its kind, making it ideal for military use. Furthermore, they are considerably more stable than comparable conventional products and can withstand higher wind and snow loads. They are also a much lighter and smaller packaged volume, achieving up to 35% less weight and up to 50% less volume than standard systems.

Large Carbon Tents provide a large area that is ideal for canteens, conference rooms, waiting and relaxation areas. The structures can be used in extreme temperatures from -40 °C to +80 °C and have already proven themselves in the harshest weather conditions and environments.

Custom sizes are available on request.

The tent size comes in a 5.65m width, variable length up to 13.20 m and 2.27 m wall height. The design allows for multiple uses, with an extensive range of accessories. Thanks to their low transport volume, a standard inflatable shelter can be packed and transported on 1 pallet.

Connection to other tents or containers is possible. You can configure your tent system to your specification. It can be adapted to suit a wide range of conditions, no matter how challenging they may be.

The tent system can be packaged and transported in a 20 foot container. Depending on the size and configuration, it can be set up by 4 people within approximately 20 minutes.

Our accommodation and emergency shelters meet the usual military specifications and can be adapted to accommodate an individual country, regional and climatic requirements.

Tent models are available in various sizes (P10 to P22), ranging from 23.75 m² to 70.80 m².

Custom sizes are available on request. The largest version of the accommodation and team tent (type P22) has a weight of approx. 165 kg. The assembly time of this tent system is around 15 minutes with a team of 3 people.

Large tents are equipped with an extruded aluminium frame that can withstand high snow and wind loads without any problem. The tent systems are built according to recognised standard specification and can be adapted to country-specific requirements. They are available in different sizes and unlimited lengths.

These large tents can be packed and transported in 20-foot containers and, depending on their size and configuration. They can be set up in just a few hours.

• A storage building from our range will take just days to install, can be used on a hire contract for temporary interim needs or long term on a purchase contract.
• A single layer industrial grade PVC fabric is used for the roof and a choice of corrugated steel sheets are available for the walls. The roof offers a high degree of natural light, meaning lighting costs can be significantly reduced.
• Standard buildings range from 5.00 to 30.00 m width, unlimited length and 6.20 m wall height. Bespoke sizes (including up to 7.2 m wall height), configurations and colours are available.
• The aluminium frame comes with a 10 year guarantee and allows for a very fast construction method onto existing concrete surfaces.

This extensive range of Large Event Tents for sale are available from 10.00 m to 40.00 m widths and a length that can be increased or decreased in 5.00m bay distances. Standard and customised options available.

This Large Marquee is also available with an A-frame roof, curved roof, shaped roof and high peak roof.

The tent size comes in a 5.65 m width, variable length up to 13.20 m and 2.27 m wall height. The design allows for multiple uses, with an extensive range of accessories. Thanks to their low transport volume, a standard inflatable shelter can be packed and transported on 1 pallet.

Featuring insulated sandwich panel walling, the folding tent is factory fitted with two large windows (2,000 x 900 mm each), two small windows (1,200 x 600 mm) and two doors.

The tent roof covers are made of waterproof, opaque soft PVC.

The tent features a foldable flooring system. This is also included with the delivery.

Transport volume:: up to 6 pcs. in a 40 ft container

Thanks to our easy plug-in construction system, our changing tent can be quickly set up in an emergency situation. It can be installed in just a few minutes without any additional tools.

To ensure the changing tent remains in place, even with higher wind loads, it is weighted down using foldable PVC water tanks.

Our standard hangars are available in widths of 5.00 m – 70.00 m, a ridge height up to 6.20 m and in unlimited lengths.

Custom sizes and designs are available on request.

Our standard hangars are available in widths of 5.00 m – 70.00 m, a ridge height up to 6.20 m and in unlimited lengths.

Custom sizes and designs are available on request.

The excellent insulation properties, functionality, durability and aesthetics make our insulated temporary storage buildings a popular alternative to permanent warehouses or industrial buildings for all military operations. Regardless of regional specific requirements and conditions, our temporary warehouse buildings are already successfully being used.

Insulated temporary buildings are available in a range of sizes: Clear-span widths ranging from 5.00m to 30.00m, side height from 4.20 m to 6.20 m. Unlimited length are possible with bay distance of 5.00 m. A wind load of 0.5 kN / m² (= 102 km / h) and a snow load of 1.5 kN / m² (= 150 kg) are taken into account. Customised sizes as well as higher wind and snow loads can be implemented on request.

The assembly time is only approx. 7-8 days and enables you to use it as quickly as possible. HTS TENTIQ offers a number of hire and purchase options.

The excellent insulation properties, functionality, durability and aesthetics make our insulated temporary buildings a popular alternative to permanent warehouses or industrial buildings. Fire stations all over Germany have successfully used our temporary structures as vehicle storage. For garage use, our temporary buildings can be adapted to suit your individual requirements, both as an interim or permanent solution.

Insulated temporary buildings are available in a range of sizes: Clear-span widths ranging from 5.00m to 30.00m, side height from 4.20 m to 6.20 m. Unlimited length are possible with bay distance of 5.00 m. A wind load of 0.5 kN / m² (= 102 km / h) and a snow load of 1.5 kN / m² (= 150 kg) are taken into account. Customised sizes as well as higher wind and snow loads can be implemented on request.

The assembly time is only approx. 7–8 days and enables you to use it as quickly as possible. HTS TENTIQ offers a number of hire and purchase options.

Possibility to connect to other tents or containers. You can configure your tent system to your specification. It can be adapted to suit a wide range of conditions, no matter how challenging they may be.

The tent system can be packaged and transported in a 20 foot container. Depending on the size and configuration, it can be set up by 4 people within approximately 20 minutes.

Our shelters are available in various sizes and can be adapted to suit your requirements with a range of accessories such as floor coverings or partition walls and connecting walkways. The largest version of the emergency shelters (type P22) weighs 165kg.

Our accommodation and emergency shelters can easily be adapted to accommodate a range of weather conditions and obstacles.

Depending on the size and configuration it can be set up by 3 people within approximately 15 minutes.

Various organisations such as the fire service, church associations, community groups and aid organisations have successfully used the accommodation shelters for various applications such as camps, parties or fire brigade shelters.

Furthermore, they are considerably more stable than comparable conventional products and can withstand higher wind and snow loads. They are also a much lighter and smaller packaged volume, achieving up to 35% less weight and up to 50% less volume than standard systems. The versatile Carbon-Hybrid repair tents are suitable for smaller land vehicles as well as for large battle tanks and military aircraft.

These structures can be used in extreme temperatures from -40 °C to +80 °C and have already proven themselves in the harshest weather conditions and environments. Standard sizes range from 10.00m to 30.00m width, wall heights from 3.00 m and unlimited length. Custom sizes are available on request.

These tent systems can be packaged and transported in a 20 foot container.

Röder HTS Party Tents come in a variety of shapes and sizes and range from clear-span widths of 3.00 m to 10.00 m and come with a standard eave height of 2.30 m on most systems. Unlimited length in 3.00 m or 5.00 m sections can be achieved. Standard and customised options available.

This party tent is also available with an A-frame roof, curved roof, shaped roof and high peak roof.

This party tent is also available with an A-frame roof, curved roof, shaped roof and high peak roof.

This Party Tent is also available with an A-frame roof, curved roof, shaped roof and high peak roof.

This Party Tent is also available with an A-frame roof, curved roof, shaped roof and high peak roof.

Available in clear-span widths of 3.00 m to 12.00 m and with a standard eave height of 2.40 m. Length starts at 6.00 m long which can be indefinitely extended in 3.00 m bay extensions. Standard and customised options available.

This Party Tent is also available with an A-frame roof, curved roof, shaped roof and high peak roof.

Small, lightweight Pagoda with built-in features for fast install including ‘quick-click-into-place-bolts’ and a hooking track device for the roof fitting.

The London Pagoda features a stronger, more robust frame with an integrated ‘foldable leg’ for easy installation and minimal manpower.

The horizontal panels of the Avantgarde-version give the structure a luxurious appearance which enhances the visual experience for your visitors. They can be mounted together, for example in a row of two or in a square of four pagodas.

Choosing a Sports Structure from HTS TENTIQ offers significant cost savings over a more traditional build, along with short manufacturing and build times, plus the flexibility to adapt, relocate or sell the building at some point.

Due to the modular system, Multi-Sports Structures are available in unlimited lengths and up to 4.00 m eave height and clear-span widths ranging from 10.00 m to 40.00 m. Fully customised sizes and specifications are available and are engineered to meet project and site-specific calculations.

They provide the ideal solution for a multitude of sports including racquet sports, swimming pool covers, equestrian sports and indoor football. Whatever the activity – we have it covered!

Customised designs are developed exactly according to the requirements of the customer. Modifications to standard systems may be necessary due to special design preferences or a special characteristic of the site, such as higher snow and wind loads.

In such cases, we can fulfil your special requirements – from a small tent construction to a multilevel event building.

The Röder HTS Premium Large Marquees are available in widths ranging from 10.00 m to 25.00 m widths and a length that can be increased or decreased in 5.00 m bay distances. The Röder HTS Premium roof features a thermo roof system, a thermally efficient air-filled anti-condensation roofing system that creates a quiet internal environment, making it perfect for semi-permanent venue and sports applications.

This Large Marquee is also available with an A-frame roof or curved roof.

This Large Marquee is also available with an A-frame roof, curved roof, shaped roof and high peak roof.